Stove Surface Flame Is Too Low

Sunday, 06 September 2009 15:48 administrator

My surface burner is too low or the flame is uneven...

The burner flame openings may be clogged. Clean the burner.
Adjust the air shutter, as there may not be enough air to the burner.

Call 866.740.2258 for fast, friendly & professional service.

Oven Temperature Is Not Consistent

Sunday, 06 September 2009 15:26 administrator

My oven does not hold a set temperature...

Check to make sure the door is closing properly. A broken door does not allow the thermostat to shut off allowing carbon monoxide to escape. This will damage sensitive control electronics and produce a potentially dangerous situation.
Check the capillary tube, which senses the oven temperature and is adjusted by the oven temperature control. Be careful not to bend the tube.
Test the oven temperature by placing an oven thermometer in the center of the oven and set the temperature control switch to 350 degrees. Wait at least 20 minutes, then check the thermometer. If the temperature is not reaching the adequate temperature contact a professional appliance repair person.

Call 866.740.2258 for fast, friendly & professional service.

Stove Surface Not Heating

Sunday, 06 September 2009 15:22 administrator

My stove surface is not heating...

Check fuses and circuit breaker.
Check the power cord. Plug in another electric device to test the outlet.
Re-position the heating element.

Call 866.740.2258 for fast, friendly & professional service.

Latest Blog

Repair or Replace Your Appliance

The August, 2011 edition of Consumer Reports attempts to answer the question of when it's better to repair your broken appliance or replace it. Refrigerators, washing machines, dryers, ranges, wall ovens and vacuums were tested. Here are the results:

Cities Serviced for Appliance Repair

View map...